132
FLOOR CONTROLS
Gearshift lever
(Except auto transmission)
When shifting the gear, fully depress
the clutch pedal. Before shifting into
reverse, be sure to stop the vehicle
completely.
If reverse warning buzzer is equipped,
the buzzer sound when shifted into
reverse position.
The gearshift pattern is shown on the
knob of shift lever.
Accelerator pedal
To avoid unnecessary increase in fuel
consumption, the accelerator pedal
should be operated smoothly and rea-
sonably.
Make sure that injection pump lever
reaches maximum speed stopper
when pressing accelerator pedal fully.
If the lever won’t reach the stopper,
use accelerator pedal cable adjusting
nut to adjust the cable length.
Brake pedal
When stopping your vehicle, do not
press the pedal forcibly but try to
press it repeatedly. On a downhill,
use this pedal together with exhaust
brake as required.
To Next Page
Loading...