EasyManua.ls Logo

Daewoo BM090 - Page 136

Daewoo BM090
261 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
134
ҮEngine can be started by the
engine start control panel installed
at the upper side of engine in the
engine compartment.
ҮFirst switch “ON” the battery main
switch in the driver’s compartment,
then set the toggle type start switch
to “ON” to operate the starter
switch, to stop the engine, push the
stop button.
ENGINE STARTING IN ENGINE COMPARTMENT
When the engine starter switch in
steering column is located in
“OFF” position, by setting the tog-
gle switch to “ON”, only the starter
switch operates and the engine
turns accordingly but the engine
doesn’t combust because the
engine fuel cut lever is pulled.
To run the engine, the engine
starter key should be located in
“ON” position.
NOTICE
INTERRUPTINTERRUPT
ENGINE STARTER 
INTERRUPT S/W
BATTERY
INTERRUPT S/W
CLOSE CLOSE
STARTER
SUB S/W