145
4. Take exceptional care to adjust
idle speed when the engine tem-
perature is low.
5. If you had attempted to start
engine with no fuel in the fuel
tank, you should bleed the fuel
system. With no bleeding opera-
tion, you cannot start the engine
even after refilling the fuel
tank.(Refer to “Bleeding of fuel
system” at page 168.)
Starting the engine in cold
weather
1. With the switch in the “ON” posi-
tion the indicator lamp will light up
showing the engine is pre–heated
automatically. After pre–heating is
completed, the indicator lamp will
go out.
2. After pre–heating is completed,
press the clutch pedal and accel-
erator pedal to start the engine.
3. Use the idle control knob to idle
the engine at a moderately fast
speed.
3. Normal idle speed : 550~600 rpm.
4. Avoid unnecessary idling of the
engine when coolant temperature
reaches above 60°C.
5. After warming up the engine, bring
the idle control knob back to its
original position.
To Next Page
Loading...