6
GETTING ON AND OFF, DRIVER’S SEAT AND BELT
DOOR OPENING AND CLOSING
(Applicable for vehicles in all
entrance door with mechanical key)
When opening the front door to get
in, first unlock the mechanical key on
the entrance door and operate the
entrance key on the right side of the
front middle panel.
When closing the front door to get
off, open the front door by operating
the door control switch and get off.
In the outside of bus, close the door
with the key and look the mechanical
key on the entrance door not to be
opened in case of air leaking.
(Applicable for vehicles in all
entrance door except mechanical key)
When opening the front door to get
in, operate the entrance key on the
right side of the froot middle panel.
When closing the front door to get
off, open the front door by operating
the door control switch and get off.
In the outside of bus, close the door
with the key.
Before operating entrance key, unlock
mechanical key on door frame.
NOTICE
When opening front entrance door for a long time, setting emergency valve
at manual position and put control switch in close position. When returning
to automatic condition, putting control switch and door in same condition
and set emergency valve at automatic position.
CAUTION
(Type A : Toggle switch) (Type B : One touch switch)
To Next Page
Loading...