Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as
follows:
1. Insert the Micro USB Plug (8) of the USB
Charging Cable (7) into the USB Charging Port
(6) on the rear panel of the Table Mini Fan to
charge the internal battery.
2. Insert the Large USB Plug (9) of the USB
Charging Cable (7) into a suitable USB charger
rated at 1A or higher such as a dedicated USB
mains charger or USB outlet on a computer.
3. The LED Indicator (3) will flash Red whilst
charging. Once the battery is fully charged, the
LED Indicator (3) will change to White to indicate fully charge and the USB
Charging Cable (7) can be removed.
4. The internal battery can operate for 2 - 8hours after it is fully charged. Battery
will take 2 - 3hours to fully charge from flat.
The Table Mini Fan can be used whilst connected to the USB supply.
Using Your Table Mini Fan
1. Switch on the Table Mini Fan by pressing the
Power/Speed Button (4).
2. Press the Power/Speed Button (4) for fan speed I.
3. Repeatedly press the Power/Speed Button (4) for
speeds 2 and 3.
4. The LED Indicator (3) will illuminate White when
the Table Mini Fan is switched ON (speed I).
5. Further press the Power/Speed Button (4) after Speed III to switch the unit off.
The airflow direction can be adjusted by swinging the
Fan Guard (1) up and down.
The LED Indicator (3) will flash Red whilst during use
when the battery Power is less than 20%
To Next Page
Loading...
