EN
33
2) Press key and the last two digits of the year ashes.
3) Edit the year, month, time and date by pressing or key.
4) Press key to con rm the setting, and return to the “DATE & TIME” menu.
Note: The date and time will be automatically set when the rst caller ID message is
received.
* CONTRAST
There are 8 levels of LCD contrast can be selected.
1) At standby state, press key, then press or key to nd CONTRAST.
2) Press key to enter into CONTRAST setting.
3) Select one desired contrast from all 8 levels, press key to con rm.
* SELECT BASE
This function allows registering the handset to existing base (with other handset
registration)
1) Press key, then press or key to choose SELECT BASE.
2) Press key and the LCD displays BASE 1 +.
3) Press or to select base (BASE 1~4) or AUTO.
4) Press to begin searching, if you hear a sound of “di-du”, means register successful.
* HANDSET DEFAULT :
This function allows restoring the handset setting to the factory default.
1) Press key, then press or key to select HS DEFAULT item.
2) Press key to con rm.
3) The user will be prompted to enter the PIN CODE, the display shows PIN?, then press
numerical keys to input code.
4) If the PIN code is validated all base settings will be returned to the factory default.
Handset Menu function 5: REGISTRATION
Maximum 5 handsets can be linked to the same base unit by the follow ways,
Maximum 4 bases can be linked to the same handset by the follow ways:
1) In standby mode, press key, then press or key to select REGISTERATION item.
2) Press
key to enter. Press or key to select BASE from BASE1, BASE2, BASE3 or
BASE 4.
3) Press
key to con rm, LCD displays PIN? Then enter the pin code (defaulted as 0000,
if input wrong number, press R/CLR to delete).
4) When nished press
key to con rm. LCD display SEARCHING, then press and hold
key until you has get DI-DU- DU- sound. The handset and base have registration
successfully.
To Next Page
Loading...
