Need help?Do you have a question about the Daewoo FRN-T30H3GP and is the answer not in the manual?
General| Brand | Daewoo |
|---|---|
| Model | FRN-T30H3GP |
| Category | Refrigerator |
| Language | English |
Lists and illustrates interior components for specific models.
Details interior parts for alternative refrigerator models.
Explains the function of the Multi Crisper selection button.
Details how to adjust the freezer compartment temperature settings.
Describes the process for setting the refrigerator compartment temperature.
Explains the operation and activation of the childproof lock feature.
Describes the power saving mode activation and behavior.
Details temperature control points for various modes in the freezer.
Explains the operation and duration of the quick freezer mode.
Describes the quick mode operation for the refrigerator compartment.
Details the operation and duration of the speed mode for multi-crisper.
Lists fan motor RPM specifications for different control modes.
Describes the precooling stage in the freezer defrost process.
Details the heater defrost stage for the freezer compartment.
Explains the pause duration and component status during defrost.
Describes the delay period for fan motors after defrost.
Details the heater defrost stage for the refrigerator compartment.
Explains the pause duration and component status during defrost.
Describes the delay period for fan motors after defrost.
Details time delays for compressor and fan motors after system events.
Explains time delays for freezer/refrigerator fan motors during door opening.
Instructions on how to enter the DEMO mode.
Details the control behavior of components in DEMO mode.
Describes the display indicators for DEMO mode.
Instructions on how to exit the DEMO mode.
Provides troubleshooting steps for weak cooling based on resistance values.
Explains the cause and control for the 'F 1' error code.
Explains the cause and control for the 'R 1' error code.
Explains the cause and control for the 'r t' error code.
Explains the cause and control for the 'F d' error code.
Explains door switch error codes and their resolution.
Explains the cause and control for the 'C 1' error code.
Explains the cause and control for the 'E P' error code.
Describes the 'd 2' display indicating A/s Defrosting is operating.
Describes the 'C o' display indicating Pull Down Mode is operating.
Explains the cause and control for the 'r d' error code.
Explains the cause and control for the 'H 5' error code.
Explains the cause and control for the 'r 2' error code.
Explains the cause and control for the 'F 3' error code.
Explains the cause and control for the 'r 3' error code.
Explains the cause and control for the 'F u' error code.
Explains the cause and control for the 'R u' error code.
Explains the cause and control for the 'C H' error code.
Instructions on how to enter the A/S Defrosting Mode.
Instructions on how to enter the Pull Down Mode.
Instructions on how to enter the Demo Mode.
Instructions on how to enter the Error Display Mode.
Procedures and tools for removing refrigerant and residuals.
Steps and precautions for replacing parts and welding.
Process for evacuating the system using a vacuum pump.
Steps for charging refrigerant and welding the inlet.
Methods for checking refrigerant leaks and cooling performance.
Guidelines for compressor compartment arrangement and tool storage.
Procedures for transportation and installation of the unit.
Specifies the necessary tools for heavy repair tasks.
Precautions for removing refrigerant from the system.
Precautions for replacing the drier component.
Precautions for welding with nitrogen blowing.
General precautions for heavy repair operations.
Steps for charging the correct amount of refrigerant into the system.
Important points to consider during refrigerant charging.
Specific steps for charging refrigerant while the compressor is operating.
Procedures for conducting a gas leakage test.
Guidelines for arranging pipes after work completion.
Safety regulations and precautions for heavy repair work.
To Next Page