CONTENTS REMARKS
1. Conditions to turn on LCD Light
1) Power input (plugin)
2) When any button on the panel is pushed, first the back light turns on, then
button control is done.
3) When F/R door is open, the light turns on.
2. Conditions to turn off the light
1) The back light turns off 10 seconds after F/R door is closed
2) 1 minute after button control
Explanation After Delivery
INPUT Control Object
"FREEZER SET." button
"REFRIGERATOR SET." button
Power Cord
Electrical components and LCD
CONTENTS REMARKS
1. Start
Push "REFRIGERATOR SET." button for 3 seconds within 10 seconds just
after power input.
2. Control
1) Electrical components are OFF for 3 hours.
2) Display operates in normal way.
Prevention of Compressor Restart
INPUT Control Object
None Comp.
CONTENTS REMARKS
Comp. does not start again for 6 minutes though F-sensor is ON. 6min. delay
Back Up Function
INPUT Control Object
None
CONTENTS REMARKS
1. Filter Exchange Information : Record as a realtime from the point of Power
Input.
2.P FACTOR (Information about Ice Maker)
3.Ice Maker Lock
To Next Page
Loading...
