1 2
DESCRIPTION AND OPERATION
HOSE CONNECTION SUCTION CONTROL
•
The suction power control at the
hand grib enables you to control
suction power.
PIPE CONNECTION
•
To connect the nozzle, hold the
tubes and the handle: insert the
narrowed section into the wide
section.
WIDE SUCTION NOZZLE
•
Use this nozzle for cleaning both carpeted and
uncarpeted floors.
ON/OFF SWICH
•
Turn the unit off(on) by pressing
the ON/OFF switch button on the
unit.
CORD REWIND BUTTON
• Rewind the power cord by
pressing the cord rewind button.
DUST METER
•
When dust reach to the max,
please open it.
STORAGE
• If you want to store the cleaner,
hitch the brush clip onto the
vacuum cleaner.
PRACTICAL PARKING
• Insert the plastic holder attached
on the connecting tube into the
holder hook hole on the front
underside of body.
UPHOLSTERY NOZZLE
COMBI CREVICE NOZZLE COMBI CREVICE NOZZLE
•
Press the button on top of the
plastic suction tube head and then
push it in the direction of air inlet
hole till locked.
•
When discharge the hose, press
the button on top of the plastic
suction tube head and then pull it
out towards you.
POWER CONTROL SWITCH
•
Adjust the suction power by
rotating the swich on the unit
To Next Page
Loading...
