3
CF65/75/85 series Inspection and adjustment
ZF 6S-850 GEARBOX
3-3
3.3 INSPECTION AND ADJUSTMENT, SECONDARY SHAFT AXIAL PLAY
Inspection and adjustment, secondary shaft
axial play
1. Press the outermost bearing race uniformly
so that the bearing is free of play. Rotate
the secondary shaft constantly while
pressing, so that the bearing gets set.
2. Use a depth gauge to determine the
distance between the outer bearing race
and the gearbox housing (A).
3. Compare the measured value with the
specified permissible value. See “Technical
data”.
4. If necessary, adjust the axial play by means
of another adjusting ring.
5. Calculate the play for the correct size of the
adjusting ring as follows:
Distance A 2.95 mm
Gasket thickness + 0.40 mm
Play(0-0.1) --0.05mm
Required adjusting
ring =
3.30 0.05 mm
V3 00 402
A
5
ᓻ 0111
https://www.truck-manuals.net/
To Next Page
Loading...
