3
CLUTCH
Draining and filling CF65/75/85 series
6-4
6.3 BLEEDING AS TRONIC CLUTCH UNIT
Note:
The clutch unit must be bled before it is
installed, to prevent it from being installed under
tension.
1. Undo the bleed screw (2) of the clutch
unit (1).
2. Push the control rod (3) inwards and tighten
the bleed screw while the control rod is
depressed. See “Technical data”.
V300730
1
2
3
10
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
