3
CF65/75/85 series Lubrication
PROP SHAFTS
5-1
5. LUBRICATION
5.1 LUBRICATION, PROP SHAFT AND AUXILIARY SHAFT
1. Note:
Standard vehicles have a maintenance-free
prop shaft. Vehicles that are to be used in
heavy conditions are fitted as standard with
lubricating nipples in the prop shaft spiders.
The following applies to these vehicles:
Before lubricating, clean the lubricating
nipple with a cloth.
2. Note:
The maximum lubricating pressure should
not exceed 15 bar.
Grease the universal joints of the prop shaft
until clean grease comes out of all four
needle sleeve seals.
M9030
ᓻ 0111
11
https://www.truck-manuals.net/
To Next Page
Loading...
