0
3
CF65/75/85 series ZF intarder
TECHNICAL DATA
11-1
11. ZF INTARDER
11.1 GENERAL
Axial play
Stator 0 0.05 mm
Output shaft bearing 0 - 0.1 mm
Oil pump external rotor 0.03 - 0.05 mm
Intarder drive sprocket
Heat in oven for a maximum of 15 minutes 130_ - 150_C
11.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques.
Any other threaded connections that are
not specified must therefore be tightened to the
torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed unless stated otherwise.
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
