3
PTO
Disassembly and assembly CF65/75/85 series
5-10
7. Fit the selector shaft together with the
shifting fork and pressure spring into the
selector housing.
8. Fit the piston with O-ring into the cylinder
and mount the cylinder with a gasket on
either side and the cover against the
gearbox housing. Tighten the attachment
bolts to the specified torque. See “Technical
data”.
9. If necessary, fit a push/pull switch to the
side.
10. Check the PTO control.
13
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
