0
3
CF65/75/85 series Mechanical gearbox control
TECHNICAL DATA
1-3
1.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques.
Any other threaded connections that are
not specified must therefore be tightened to the
torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed unless stated otherwise.
Control rod
Fastening bolt (1) of control rod
on gear lever unit
40 Nm
Attachment nuts (3), gear
lever unit
27 Nm
Attachment bolt, selector shaft
lever to gearbox selector
housing
40 Nm
312
V300275
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
