Need help?Do you have a question about the DAF DF 615 M and is the answer not in the manual?
Instructions on how to order spare parts, requiring specific engine details.
Explains the function of the master, starter, and stop controls.
Describes various gauges like fuel, oil pressure, coolant temp, and counters.
Details the fuel lever and cold-starting device.
Guidance for the initial 100 operating hours or 400 km of engine use.
Outlines daily checks including oil level, coolant, and fuel level.
Step-by-step procedure for starting the engine safely.
Emphasizes regular checks of engine behavior via instruments and for leaks.
Describes the procedure for safely shutting down the engine.
Discusses the importance and properties of engine lubricating oil.
How to check and maintain the correct engine oil level.
Details the recommended intervals and procedures for changing engine oil.
Describes the types of oil filters and their replacement.
Specifies the minimum requirements for diesel fuel quality and additives.
Instructions for replacing the main fuel filter element.
Information about the fuel injection pump as a precision instrument.
Advice on injector setting and availability of spare injectors.
Procedure for bleeding air from the fuel system.
Explains the function and draining of the moisture separator.
Instructions for cleaning the air cleaner element.
Overview of the cooling system operation and pressure.
Explains the function of temperature gauges and warning lamps.
Procedure for properly venting and filling the cooling system.
Instructions for completely draining the cooling system.
Precautions and use of anti-freeze for winter operation.
Advises on using rust inhibitors or emulsifying oil in the coolant.
Offers important notes and precautions regarding anti-freeze and coolant.
Explains the engine cooling system using intercooling.
Describes the intake air cooling system for specific engine versions.
Explains the system of keel cooling for engine heat dissipation.
Explains skin cooling as an alternative to keel cooling.
Instructions for draining the outboard water pump.
Warning against running the pump dry for extended periods.
How to check the V-belt tension for the pump.
Guidance on replacing packing rings in the pump.
General maintenance guidelines for the electrical system.
Maintenance procedures for the engine batteries.
Instructions and precautions regarding the alternator.
Tips to reduce radio interference from the electrical system.
Covers cleanliness, part marking, gaskets, bolts, nuts, and locking.
Steps for renewing and tensioning Vee-belts.
Procedure for measuring and setting valve clearance.
Steps for replacing an injector, preventing dirt ingress.
Advice on injector setting and availability of spare injectors.
Instructions for cleaning the air cleaner element.
Guidelines for replacing injection pipes with genuine parts.
Overview of the SIHI outboard water pump's components and design.
Covers priming, lubrication, draining, V-belt, and packing rings.
Description of the Jabsco marine pump's construction and operation.
Covers V-belt, draining, running dry, temperature, laying up, and impeller replacement.
Overview of the Velvet hydraulic marine gear units.
Instructions for operating the Velvet marine gear.
Details on the lubrication system for the marine gear.
Procedures for checking oil level, filling, and changing oil.
Specifies the recommended oil type and temperature limits.
Lists common symptoms and possible causes for Velvet marine gear faults.
Provides specifications and technical data for the Twin Disc MG-506 gear.
Explains the function and operation of the Twin Disc reversing gear.
Instructions for operating and maintaining the Twin Disc reversing gear.
Lists common symptoms and possible causes for Twin Disc reversing gear faults.
To Next Page
General
