DAF LF User Manual

10
1
Quick Reference Guide
Performing forced stationary regeneration
When all safety checks have been met,
press up the DPF switch (1) once to
allow the engine management system
(EMS) to carry out a self check. Follow
the instructions on the instrument
panel.
Press the switch up again to start the
forced stationary regeneration process.
NOTE: Switch off (down) to
stop or inhibit regeneration
when working inside or when
entering a hazardous area.
D005035
1
DW63216901.book Page 10 Monday, May 18, 2015 4:25 PM

DAF LF Specifications

General

Brand	DAF
Model	LF
Category	Trucks
Language	English