ENGLISH
20
PROBLEM SOLUTION
The control
panel shows
incomprehensible
information.
The lights don’t
stop flashing.
The controller could have found
an anomaly in the start-up and
blocked the heating pad’s operation
for safety purposes. Turn the
controller off and on again. If the
anomaly persists, please contact our
authorized technical service center.
The heating pads reach temperatures between 65º and 75º C at their
maximum position. This data should serve as a guideline. Monitoring
is carried out in laboratories, according to the procedure in the UNE-
EN 60335-2-17 directive.
Manual Termicas_N/L ESP/ING.indb 20 15/03/10 16:41
To Next Page
Loading...
