Need help?Do you have a question about the DAHAO BECS-185 and is the answer not in the manual?
General| Brand | DAHAO |
|---|---|
| Model | BECS-185 |
| Category | Control Systems |
| Language | English |
Safety instructions for operation, transportation, installation, and maintenance.
Key functionalities and capabilities of the computerized embroidery machine.
Overview of control panel components and their functions.
Explanation of the main display screen elements and their meanings.
Step-by-step guide for performing standard embroidery operations.
Process for choosing the storage device (floppy or USB) for operations.
How to transfer embroidery designs from disk to the machine's memory.
Process for saving embroidery designs from the machine's memory to disk.
Adjusting general embroidery settings like scale, rotation, and repetition.
Configuring the sequence of color changes during embroidery.
General steps and guidance for configuring machine parameters.
Explanation of specific embroidery functions and their usage.
How to choose a specific design for the next embroidery job.
Procedure to remove embroidery designs from the machine's memory.
Initiating the process to edit existing or create new embroidery designs.
Detailed functions for modifying embroidery design stitches and properties.
Creating embroidery designs using the built-in letter font database.
Fine-tuning letter arrangement, spacing, and appearance.
Marking and saving the initial embroidery position for a design.
Aligning the embroidery design with the center of the frame.
Function for stopping the needle in the fabric for cloth or quilt embroidery.
Configuring the frame's starting position and power-off safety settings.
Maintenance and troubleshooting functions for repairmen only.
Step-by-step guide for performing sequin embroidery operations.
Configuring parameters specific to multi-sequin embroidery.
Overview of the capabilities and features of zigzag embroidery.
Step-by-step guide for performing zigzag embroidery.
Procedure for updating the main control unit software via USB.
Steps required to update the software on the peripheral control board.
To Next Page
