To Next PageTo Next Page
Need help?Do you have a question about the Dahle 846 and is the answer not in the manual?
General| Type | Guillotine Cutter |
|---|---|
| Cutting Capacity | 3.5 mm |
| Cutting Length | 1420 mm |
| Weight | 14.2 kg |
| Dimensions | 1640 x 430 mm |
Read operating and safety instructions carefully before operation and keep them for later use.
Defines the machine's purpose and clarifies warranty coverage and exclusions.
Specifies personnel requirements and warns against touching the blade's sharp edge.
Details model dimensions, cutting capacities, and part numbers.
Covers fundamental machine operation and warns against inserting foreign objects.
Illustrates assembly and adjustments using various Allen keys.
Step-by-step guide for raising the lever and preparing for cutting.
Demonstrates cutting techniques and adjustments with safety alerts.
Shows safety checks, 'O.K.' confirmations, and paper alignment.
Covers cutting steps and adjustments using a 5mm Allen key.
Details lever operation and blade adjustment with a 3mm Allen key.
Illustrates general maintenance and adjustments using a wrench.
Shows setting various angles and validating operations.
Identifies replacement parts and shows maintenance with a 4mm Allen key.
