HDCVI Standalone DVR User’s Manual
you set for each channel. See Figure 4-146.
Figure 4-146
4.11.4.6 HDD Detect
The HDD detect function is to detect HDD current status so that you can clearly
understand the HDD performance and replace the malfunction HDD.
There are two detect types:
Quick detect: It is to detect the storaged files on the HDD. You can use format
function to repair the bad track. System can not detect the bad track if there is no
record on the HDD.
Global detect: It detects the whole HDD. The process may take a long time and may
affect the HDD that is saving the record. If it detects the bad track, it may result from
the damaged HDD.
4.11.4.6.1 Manual Detect
The manual detect interface is shown as below. See Figure 4-147.
Please select detect type and HDD. Click start detect to begin. You can view the
corresponding detect information.
To Next Page
Loading...
