Dahua DH-HCVR5424L-S2 - Page 197

HDCVI Standalone DVR User’s Manual
187
iSCSI function is for some series product only.
You can set the network mapping HDD so that device can storage audio/video on the
network HDD.
From Main menu->Setting->Storage->ISCSI, you can go to the following interface. See
Figure 4-151.
 Server IP address: It is to input ISCSI server IP address.
 Port: It is to input ISCSI server port value. The default setup is 3260.
 User name/password: It is to input ISCSI server user name and password. Check the
Anonymous button if it supports anonymous login.
 Set path: You can click the Set path button to select the remote storage path. Please
note each path here stands for one ISCSI share disk. The path has been generated
when it is created at the server.
 Add: After you input the above information, click add button to add the new
information to the list.
Figure 4-151
Click Ok button to complete the setup.
Tips
Click the modify/delete button to change or remove the ISCSI disk.
Now, from the main menu->setting->Storage-> HDD manage, you can see the following
interface. See Figure 4-152.