HDCVI Standalone DVR User’s Manual
Source IP: Source IP refers to host IP address that sends out information (usually it is
the device host.)
Destination IP: Destination IP refers to other systems that receive information.
Source port/destination port: Please input according to your own situation.
Record channel: It is for you to check record channel. The record channel applies to
one group (optional) only.
Frame ID: Six frame ID groups verification can guarantee information validity and
legal. You need to input start position, length, key and etc according to your
communication protocol and data packet contents.
Figure 4-171
In Figure 4-171, click data button after frame ID, you can see an interface shown as in
Figure 4-172. Here you can set field start position, length, and overlay title.
Figure 4-172
To Next Page
Loading...
