HDCVI Standalone DVR User’s Manual
Please refer to the following sheet for detailed information.
There are four options: 1920×1080,1280× 1024(default),1280×
720,1024×768. Please note the system needs to reboot to activate
current setup.
Here is for you to adjust menu transparency. The higher the value
is, the more transparent the menu is.
Check the box here, you can view system time and channel
number on the monitor video.
Check the box; you can optimize the preview video effect.
5.8.5.2.2 TV Adjust
It is to set TV output region. See Figure 5-99.
Figure 5-99
5.8.5.2.3 Tour
The tour interface is shown as in Figure 5-100. Here you can set tour interval, split mode,
motion detect tour and alarm tour mode.
Figure 5-100
Please refer to the following sheet for detailed information.
To Next Page
Loading...
