HDCVI Standalone DVR User’s Manual
Figure 5-113
Add user: It is to add a name to group and set the user rights. See Figure 5-114.
There are four default users: admin/888888/666666 and hidden user “default”. Except
user 6666, other users have administrator right. The user 666666 can only have the
monitor rights,.
Hidden user “default” is for system interior use only and can not be deleted. When there is
no login user, hidden user “default” automatically login. You can set some rights such as
monitor for this user so that you can view some channels without login.
Here you can input the user name and password and then select one group for current
user.
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than
the admin.
To Next Page
Loading...
