Dahua DH-PFM88 Series - 5 Setting Wizard (Continued); Custom Scenario Configuration Options

21
Figure 5-7 Working Scenario
Step 8 Click “Next” to show custom scenarios.
 When wireless mode is access point, the user only needs to change channel width
to be 40+MHz or 40-MHz, set output power at 27dBm and tick “ACK-Timeout
Adjustment”. Other options remain unchanged.
 When wireless mode is client, the user shall set channel at 20/40M, output power
at 27dBm and tick “ACK-Timeout Adjustment”. Other options remain unchanged.
Figure 5-8 Custom Scenario