34
Ping Interval: time interval between two pings.
Ping Failure: when continuous Ping failure reaches the set value, the device will reboot WIFI.
Startup Delay: it will start to ping the target host, after Wireless Bridge system is started and delayed for
the set time period.
Telnet: when Telnet is enabled, in command prompt window of Windows XP or Windows 7, Telnet
xxx.xxx.xxx.xxx(DH-PFM88XIP) can be used to login DH-PFM88X. When Telnet is disenabled, it cannot
be used to login the system.
Syslog: enable Syslog function, set PC IP of Syslog server and set server port to be 514. Then, relevant
log information will be seen on Syslog server.
NTP Client: if DH-PFM88X can go online, NTP client function is enabled and URL of NTP server is set,
DH-PFM88X will calibrate device time according to NTP server, and display it on status display page.
SNMP Proxy: with SNMP proxy, network administrator can monitor network performance, search and
solve network problems. For example, enable SNMP proxy, fill in a user name in SNMP community, such
as creatcomm, fill in the mailbox such as jerry@creatcomm.com and write creatcomm in location
information. Then, save and apply. Install mrtg on the host, and open mrtg webpage to observe traffic
and other information about DH-PFM88X.
To Next Page
Loading...