Dahua DHI-ARC3008C - Page 22

Alarm Control Panel Installer Manual
21
The Grand Tour 1.14
Grand tour Figure 1-10
Table 1-5 Functions introduction
No.
Name
Function
1
LCD display
Show all the system information including management and
programming. For details, see "1.17 Main Interface of LCD Display."
LED indicators
Give information about power status, battery status, failures, bypass,
and alarm status of each Area. For details, see "1.16 LED Indicators."
2
The keys
The Keypad keys can do numerous functions. Each key has specific
function. For details, see "1.15 The Keys."
3
Ports
+12V: Supplies 12V DC.

GND: Ground.

RS485_A1

RS485_B1

The Keys 1.15
The Keypad keys can do numerous functions. Each key has a specific function as explained below.