Dahua DHI-ARC3008C - Page 23

Alarm Control Panel Installer Manual
22
The keys Figure 1-11
1.15.1 Numeric Keys (from 0 to 9)
The numeric keys give the functions as below:
 Type in access codes as required to access programming (TECHNICIAN or user) or to arm/disarm.
 The keys from 1 to 8 represent eight zones. When the zone is not ready, you can press and hold the
key to show the NOT READY details, and when the key LED light slowly flashes or quickly flashes,
press and hold the key to show the alarm details.
 The keys from 0 to 8 can be used to type in or edit alphanumeric descriptions.
 Press 1 to type in "#", "*", and "." . Press 0 to type in space.
1.15.2 Other Function Keys
Table 1-6 Other function keys
Key
Function
Exit from the current menu or return to the previous menu.
Move the pointer to the left when you edit.

Press and hold to delete text.

Bypass the Zones as below:

1. Type in the access code.
2. Press . The interface for setting the bypass Zones is shown.
3. Press the corresponding numeric key of the Zones that you want to
bypass. For example, if you want to bypass Zone 12, press Key 1
and then press Key 2.
4. Press Enter to confirm the setting.
Enter the User Menu or the Installer Menu.
