Dahua DHI-ARC3008C - LED Indicators

Alarm Control Panel Installer Manual
24
Key
Function
+ 1 (F1)
Panic Activation (silent activation or with sirens and Keypad buzzer)

On the menu of ZONE TROUBLES, ZONE MANAGER, and CHIME

ZONES, press + 1 (F1) to show the Area selection interface
where can select the Areas within which to do the searching and
filtering.
On the OUTPUTS menu, press + 1 (F1) to do a test to the

output circuit, and Active is shown.
+ 2 (F2)
Robbery Activation (silent activation)

There is no response on the interface but this event is recorded in the
log.
On the menu of ZONE TROUBLES, ZONE MANAGER, and CHIME

ZONES, you can select the Zone on which you can do the searching
and filtering.
Edit text on the interfaces such as description of module, zone, user

code, output, timer and display.
Edit telephone number, SMS number, and SIM number on the TEL

NUMBER menu, and PSTN number on MONITOR STATION menu.
+ 3 (F3)
Medical Activation (with Keypad buzzer)

On the WALK TEST menu, switch between individual test and

multiple test.
On the TEL NUMBER menu, start a phone call test or message test.

+ 4 (F4)
Fire Alarm Activation (with Keypad buzzer and siren)

On the TEL NUMBER menu, stop a phone call test.

+ (1–8)
Query which zones under the specified Area.
+ (01–99)
Query which Areas the specified zone belongs to.
LED Indicators 1.16
There are 12 LED indicators on the Keypad that respectively gives information about power status, battery
status, faults, bypass, and alarm status of each Area.
1.16.1 Overview
The Table 1-8 shows the icon, color, and meaning of each LED indicator.
Table 1-8 LED indicators overview
Icon
Color
Meaning
Green
Power status
Green
Battery status