95
The Ping interface is displayed.
Ping Figure 4-109
Enter the IP address and ping times, and click Ping. Step 2
After several seconds, ping info is displayed. The network is connected if returned TTL value
is less than or equal to 64.
Information display Figure 4-110
When ping function is enabled, you can open only one web client. Otherwise, ping information
might not be displayed completely.
4.6.3.4 Log Level
Configure background printing debugging log level.
Select Info > Device Info > Device Info > Log Level. Step 1
The Log Level interface is displayed.
Log level Figure 4-111
Configure log level. Step 2
Click OK. Step 3
To Next Page
Loading...