14
Device initialization Figure 3-1
Set admin user password. Step 2
The password can be set from 8 through 32 non-empty characters and contains at least two
types from capital letter, lower-case letter, number, and special characters (excluding "'", """,
";", ":" and "&"). Password and Confirm Password shall be the same. Enter a strong password
according to the password strength indication.
Click OK. Step 3
Click right mouse button. Step 4
Login Figure 3-2
Enter password, and then click OK to login. Step 5
The account will be locked if wrong password is entered for 5 times within every 30 minutes.
3.2.2 Main Interface
After login, the main interface is displayed.
To Next Page
Loading...