23
Parameter Description
TCP Port
TCP service port. The default setting is 37777. You can configure this
parameter according to your actual situation.
Name and Password Enter the user name and password to login the remote device.
Protocol Select protocol of remote device.
Channel Amount
Select the channel number that you want to connect. You can select all
channels.
Click OK to complete the settings. Step 3
The device will appear in the Added Device area.
3.3.6.4 Editing Remote Device
Click . The Edit dialog box pops up. Refer to Table 3-7 to edit remote device information, and
then click OK.
3.3.6.5 Deleting Remote Device
Click or select an added remote device, and then click Delete.
3.3.7 System Info
You can view version info, online users and system status.
System info Figure 3-13
To Next Page
Loading...