EasyManua.ls Logo

Dahua DHI-NVD0905DH-4I-4K - Signal Configuration

Dahua DHI-NVD0905DH-4I-4K
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
No. Name Description
5 Lock
Click the icon to lock the window. Then,
window position and size
cannot be adjusted.
Click to unlock the window.
6 Audio N/A
7 Close Click the icon to close this window.
4.3.2.3 Configuring Window Information
You can set window position and size according to your need.
Precondition
Manual setting window wide and height has been enabled. See"4.5.5.3.2 Global Setup".
Operation Steps
Double click the window. Step 1
The Window Information interface is displayed.
Window information Figure 4-8
Configure window position and window size. Step 2
Click Apply. Step 3
The window position and size is adjusted according to the configuration.
4.3.3 Signal Configuration
You can select signal directly, or enter signal name in search bar to search signal.
4.3.3.1 Device Tree
1-channel 4K high definition (H.265) series does not support local signals.

Related product manuals