33
Device tree displays all local signals and the added network signals.
Local signal: Display local signal sources. See "4.5.4.2 Local Signal."
Network signal: Display the added signal sources. Click to add. See "4.5.4.1
Network Signal."
4.3.3.2 Custom
You can customize signal group. Custom tab displays the added group and signal source. You can
drag the signal group to the window for loop play of signals in the group. See "4.5.4.3 Signal Group".
4.3.3.3 Signal on Wall
Output a signal to a window on the video wall, and you can view video of the signal on the screen.
Select a window on the video wall, or press and hold left mouse button to select an area on Step 1
the video wall.
Select signal source from Device or Custom tab. Take Device for example. Step 2
Select signal source Figure 4-9
Display signal on the video wall. Step 3
Press and hold left mouse button, drag the signal to designated window, and the signal
is output to the window.
Select a window, double-click channel preview or main/sub stream, and the signal is
output to the window.
4.3.3.4 Signal Tour
Drag the configured signal group to a window, to tour play the signals on the window. Set the stay
time and stream type.
Configure signal group in Collection tab. See "4.5.4.3 Signal Group".
Select a window to tour signal. Step 1
In Custom > Collection interface, select a signal group, press and hold left mouse button to Step 2
drag the signal group to designated window.
The window will start signal tour automatically.
Click at the bottom of the interface. Step 3
All signal information in the window is displayed.
Signal information Figure 4-10
To Next Page
Loading...