37
Save combined plan Figure 4-17
For other configurations, see"4.3.4.1.1 Video Scheme".
4.3.4.1.4 Switch Timer
After setting switch time for a scheme, the system will switch to this scheme automatically at the
switch time.
Select Switch Timer tab. Step 1
The Switch Timer interface is displayed.
Switch timer Figure 4-18
Select Type, Scheme and Week, and then set switch time. Step 2
Tick the check box, and the time point will take effect.
Two scheme time periods shall not be the same.
Click OK. Step 3
4.3.4.2 Auto-align
Click , and all windows will be automatically aligned in the following way.
Each window size is equal, under the precondition of filling the entire video wall.
Windows are arranged horizontally from top to bottom.
To Next Page
Loading...