38
Auto-align Figure 4-19
4.3.4.3 Window Split
Select block or window, and split according to split plan of the system or you can enter split number
manually.
4.3.4.3.1 Block Division
During block division, the system clears previous block window, and divides the block according to
the selected split. After block division, previous windows will be closed, and previous signal will not
be kept.
Select Window Split > Block Division. Step 1
The Block Division interface is displayed.
Block division (1) Figure 4-20
Block division (2) Figure 4-21
To Next Page
Loading...