52
Setup 4.5
4.5.1 System Config
On this interface, you can complete general setting, user management, config backup, auto
maintenance, system upgrade, picture management, fan control, comm setup, safe management
and storage path.
4.5.1.1 General
You can configure basic information of the device, such as device information and system date.
4.5.1.1.1 Setting of General Information
Set device name, no. and so on.
Select Setup > System Config > General > General. Step 1
The General interface is displayed.
General Figure 4-40
Configure parameters. Step 2
Table 4-8 General parameters description
Parameter Description
Device Name
Set device name. Device name is different depending on device model. The
actual interface shall prevail.
Device No. Set device Number.
Language System language is determined by program package.
Click OK. Step 3
4.5.1.1.2 Date
You can configure the system date, and choose to enable NTP (Network Time Protocol) or not. After
enabling NTP function, device can automatically synchronize time with the NTP server.
Select Setup > System Config > General > Date. Step 1
The Date interface is displayed.
To Next Page
Loading...