Dahua DHI-NVD0905DH-4I-4K - Page 60

53
Date Figure 4-41
Configure parameters. Step 2
Table 4-9 Date parameters description
Parameter Description
Date Format Select date display format you want.
Time Format Select time format you want.
Date Separator Select date separator you want.
System Time
Set system time. Click Sync PC to synchronize with current PC time.
Sync Device
Time
Select the check box to enable function to synchronize remote device time.
DST Select the check box to enable DST.
DST Type
Select DST type, including Date and Week.
Start Time/End
Time
 When DST Type is Date, enter year, month, day, start time and end time.
 When DST Type is Week, select month, week, start time and end time
from the drop-down list.
NTP Setup Select the check box to enable NTP sync function.
Time Zone Select time zone.
Server Enter server address or domain name.
Port Enter the port number of NTP server.
Interval Set the interval to update NTP server.
Click OK. Step 3