76
Dialog box Figure 4-75
Click OK. The system jumps to HTTPS environment. Step 3
You need to login again, and then click Import Config or Export Config.
Deleting Network Signal
Select a network signal from the added signal list, and click Delete to delete the network signal.
Sorting
Click each attribute field, and will appear on the right of the field, meaning the network signal
is arranged in descending order. Click it again, and the icon turns into , meaning the network
signal is arranged in ascending order.
4.5.4.2 Local Signal
1-channel 4K high definition (H.265) series does not support this function.
You can configure input title and control ID of each channel on the board card. Control ID can
correspond to the binding source (such as keyboard), so the binding source can be displayed on the
TV wall.
Select Setup > Signal Management > Local Signal > Input Title. Step 1
The Input Title interface is displayed.
Input title Figure 4-76
The interface of 6-channel 4K high definition (H.265, with 4 input ports) series and 9-channel
4K high definition (H.265, with 4 input ports) series is displayed above. For other models, the
actual interface shall prevail.
Select the card, and configure channel name and control ID for each channel. Step 2
Enter Start Control ID and click Setup, so control ID of channels will start from the Start
Control ID.
To Next Page
Loading...