77
Click OK. Step 3
4.5.4.3 Signal Group
You can customize signal group. Signal Group tab displays added group and signal source. You can
drag signal group to the window for loop play of signals in the group.
Select Setup > Signal Management > Signal Group. Step 1
The Signal Group interface is displayed.
Signal group Figure 4-77
Create a group. Step 2
1) Move your mouse pointer to Custom device tree or Collection in Group list, and then
click .
Create a group Figure 4-78
2) Enter group name, and then click OK.
A group has been created.
Creation is completed Figure 4-79
To Next Page
Loading...