86
Screen timer Figure 4-95
Select Screen, Block and Week. Step 2
Select period and configure ON/OFF time. Step 3
Click OK. Step 4
After periods of one week have been configured.
Click Apply to Screen, and select another slot in the pop-up interface, to apply this
configuration to the slot.
Click Apply to Week, and select another week in the pop-up interface, to apply this
configuration to the week.
4.5.5.2.4 Screen Custom Control
Customize screen on and off commands.
Select Setup > Display Management > Screen Management > Screen Custom Control. Step 1
The Screen Custom Control interface is displayed.
Screen custom control Figure 4-96
Enter the Customized Manufacturer Name. Step 2
Select Enable. Step 3
Configure Screen on command and Screen off command. Step 4
Configure a hexadecimal number.
To Next Page
Loading...