For the large record file, you can use splice playback function to play the same file in
several sections at the same time. It is very convenient for you to find the video footages
you desire.
Step 1 On the main menu, click Search button, or right click mouse and then select Search.
Enter Search interface. See Figure 4-103.
Step 2 On the right pane, check the box to enable splice playback function, and then set
channel, date, split mode. The splice playback interface is shown as below. Each
section has a small triangle; you can adjust it to set time. See Figure 4-111.
Note
System supports 1/4/8/16-split mode. Slight different may be found here.
The 4-channel series product supports 4-split mode. The 8-channel series
product support 8-split mode. The 16-channel or higher series product
supports 16-split mode.
The min period of each section is 5 minutes. For the record is less than 20
minutes, if you select 4-split mode (or more than 4-split mode), system can
auto adjust so that the each section period is 5 minutes. In this situation,
some channel may have no video.
Figure 4-111
Step 3 Click to playback.
4.9.7 File List
Click , system displays file list. It displays the first channel of the record. See Figure
4-112.
To Next Page
Loading...
