The IVS, human face detection, and people counting channel amount shall not
be over 6.
Step 1 From main menu->Setup->Event->Smart plan.
Enter smart plan interface. See Figure 5-82.
Figure 5-82
Step 2 Select a channel from the dropdown list and then set the smart plan.
Step 3 Click OK button to complete the setup.
5.7.3.3 IVS (Optional)
Note
Right now, the IVS function max supports 10 rules.
Once any object violate the rule, the DVR can trigger an alarm and alert you as the
specified alarm mode.
From main menu->Setup->Event->IVS, enter IVS interface. See Figure 5-83.
Please follow the steps listed below.
Step 1 Please select a channel from the dropdown list.
Step 2 Click and then select corresponding rule.
Step 3 Set rule type and set corresponding parameters.
Step 4 Check the box to enable the rule.
Step 5 Click OK button to save current setup.
To Next Page
Loading...
