Figure 5-103
Step 2 For setup information, please refer to chapter 5.7.3.8.1 Local alarm.
The network alarm does not support anti-dither and device type.
Step 3 Click Save to complete the setup.
5.7.3.8.3 HDCVI Alarm
HDCVI alarm refers to the camera receive the camera voltage, motion detect and external
alarm. It can set alarm activation operations. This function is null if the camera does not
support alarm function.
Step 1 From main menu->Setup->Event->Alarm->HDCVI alarm.
Enter HDCVI alarm interface. See Figure 5-104.
Figure 5-104
Step 2 Click Add button.
Enter HDCVI alarm interface. See Figure 5-105.
To Next Page
Loading...
