Figure 5-171
Step 2 Select one or more channel(s) and then click to search record(s).
System supports one or more channels. The window split mode can auto
adjust according to the channel amount. System max supports 16-split.
Click button to select all channels at the same time.
Step 3 Click , system begins playback.
Select Channel
1～n(n depends on your product channel amount) means main stream and A1～An ((n
depends on your product channel amount)) means sub stream.
HD Transcoding
Note
This function is for some series product only.
When the bandwidth is limited, you can use this function to transfer the HD bit stream to
the specified lower resolution and then playback. It is to reduce network load.
In Figure 5-169, select the playback period and then select playback mode and channel(s).
Check the box to enable HD transcoding function and then click the Set button; you can
see the following interface. See Figure 5-172. Please select the resolution, frame rate, bit
rate and then click the OK button.
Figure 5-172
Select Record Type
Please note some series product supports intelligent record.
To Next Page
Loading...
