Dahua XVR4108C-S2 User Manual

321
Figure 4- 34
Step 2 Select the import file and then click the OK button.
System pops up a dialogue box to remind you successfully exported.
Note
If the imported IP has conflicted with current added device, system pops up a
dialogue box to remind you. You have two options:

OK: Click OK button, system uses the imported setup to overlay current one.

Cancel: Click Cancel button, system adds the new IP setup.
Step 3 Please click OK button to exit.
WARNING

You can edit the exported .CSV file. Do not change the file format; otherwise it
may result in import failure.

Does not support customized protocol import and export.

The import and export device shall have the same language format.
4.1.4.5 Encode
It is to set video bit streams, image bit streams, and video overlay parameters.
Besides startup wizard and configuration wizard, from main
menu->Setting->Camera->Encode, you can also go to the following interface.
4.1.4.5.1Encode
Step 1 Click Encode tab.
Enter Encode interface. See Figure 4- 35.
Step 2 Set parameters.

Channel: Select the channel you want.

Dahua XVR4108C-S2 Specifications

General

Brand	Dahua
Model	XVR4108C-S2
Category	DVR
Language	English