Dahua XVR5216AN-S2 User Manual

551
Note:

The intrusion function is valid once your network camera or your DVR supports this
function.

If you want to use the IVS function of the network camera, please make sure your
connected network camera supports this function.
Step 1 From main menu->Setup->Event->IVS, click to add the rule. Select rule
type as intrusion.
Note
Double click to change a rule name.
Step 2 Check the box to enable Intrusion function. See Figure 5- 80.
Figure 5- 80
Step 3 Click Draw rule button and then left click mouse to draw an intrusion rule. Right
click mouse to complete. See Figure 5- 81.

Dahua XVR5216AN-S2 Specifications

General

Brand	Dahua
Model	XVR5216AN-S2
Category	DVR
Language	English