Figure 5- 118
Please refer to the following sheet for detailed information.
Check the box here to enable tour function.
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode. System
supports 1/8-window now.
5.10.5.2.4 Zero-channel Encoding
It is to enable and set zero-channel encoding function so that you can view several video
sources at one channel from WEB.
The interface is shown as in Figure 5- 119.
To Next Page
Loading...