Daikin Altherma 3 GEO Series - System Requirements

9 | LAN adapter
Installer reference guide
102
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
Smart Grid application (only)
B
C
b3
b2
b1
c1 c2
230 V AC
X1A
X2A
B See "9.2.4Solar inverter/energy management system"[4109].
b1 Circuit breaker
b2 Solar inverter/energy management system
b3 Solar panels
C See "9.2.3Electricity meter"[4107].
c1 Electricity meter
c2 Electrical grid
App control + Smart Grid application
B
C
b3
b2
b1
c1 c2
230 V AC
A
a3
a2
a1
X1A
X2A
X4A
A See "9.2.2Router"[4106].
a1 Factory-mounted Ethernet cable
a2 Router
a3 Smartphone with app control
B See "9.2.4Solar inverter/energy management system"[4109].
b1 Circuit breaker
b2 Solar inverter/energy management system
b3 Solar panels
C See "9.2.3Electricity meter"[4107].
c1 Electricity meter
c2 Electrical grid
9.1.2 System requirements
The requirements posed on the heat pump system depend on the LAN adapter
application/system layout.
App control
Item Requirement
LAN adapter software It is recommended to ALWAYS keep the LAN adapter
software up-to-date.
Unit control method On the user interface, make sure to set [2.9]=2
(Control = Room thermostat)